Vytec DS no SAC

TimHo · Post by **TimHo** » Sun Apr 03, 2011 9:57 pm

Hi

Just moved to Mac and have downloaded my recent dives from a Sunnto Vytec DS - I've added a tank and although I can see the average SAC (and dive start and end pressure) I do not get the graph??? Additionally when I look at the raw data I see 0 for the all the temperature and pressure data???

When using the Sunnto PC software I cn see the SAC throughout the dive.

Any thoughts???

Thanks

Tim.

Post by **nick** » Mon Apr 04, 2011 3:12 am

The vytec ds does not record temperature or pressure during the dive - only the beginning and end pressure, and start and deepest temperature.

TimHo · Post by **TimHo** » Wed Apr 06, 2011 11:12 pm

Hi there

I'm sorry but that is not correct - Pressure is recorded for every depth reading - allowing the Sunnto PC software to display a SAC curve for the dive- you can see the information in the raw data when you import from the Sunnto PC software download. However, when downloading directly to MacDive the information is clearly not there. So same question any thoughts??

Regards

Tim

Post by **nick** » Thu Apr 07, 2011 4:40 am

This question has been covered a number of times -

http://www.mac-dive.com/forum/viewtopic.php?f=2&t=382
http://www.mac-dive.com/forum/viewtopic.php?f=2&t=676
http://www.mac-dive.com/forum/viewtopic.php?f=2&t=530
http://www.mac-dive.com/forum/viewtopic.php?f=2&t=519
http://www.mac-dive.com/forum/viewtopic.php?f=2&t=390

MacDive Forums

Vytec DS no SAC

Vytec DS no SAC

Re: Vytec DS no SAC

Re: Vytec DS no SAC

Re: Vytec DS no SAC