I am unable to connect to my dive computer. I have a Suunto Zoop Novo. I have a MAC OS 10.13.4. Both the dive computer and cable are new as of this year. I disabled bluetooth and the error message I receive is:
MacDive encountered a problem downloading from your Suunto ZOOP Novo:
Failed connecting to dive computer on serial port '/dev/tty.usbserial-ST06Y82S' (Error Code: -7)
Failed connecting to dive computer - Suunto Zoop Novo
-
nick
- Site Admin
- Posts: 4376
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Failed connecting to dive computer - Suunto Zoop Novo
This can be caused if you have something else running at the same time, eg SDM. Also a low battery will cause it. And a bad connection, make sure the cable is not damaged, the contacts aren't wet, etc.
Make sure it's in PC Transfer mode as well. Either way, in general this is a hardware issue (cable or device).
Make sure it's in PC Transfer mode as well. Either way, in general this is a hardware issue (cable or device).