Page 1 of 1
Atmos Ai to download To mac dive??
Posted: Sun Aug 07, 2011 5:53 am
by Diver Dude
I have down loaded the driver for Lion, and every time I try to download my first dive it will not work, I am trying to use the cable that came with the unit, do I need a different cable? HELP!!! please
This is the Error code.....Failed connecting to dive computer on serial port '/dev/tty.usbserial-20030001' (Error Code: -5)
Re: Atmos Ai to download To mac dive??
Posted: Sun Aug 07, 2011 6:28 am
by nick
Sounds like it is not in PC Transfer mode.
Re: Atmos Ai to download To mac dive??
Posted: Sun Aug 07, 2011 6:52 am
by Diver Dude
I have it plugged in and on the computer it has PC and starts to count down.
Re: Atmos Ai to download To mac dive??
Posted: Sun Aug 07, 2011 8:57 am
by nick
Make sure the cable is connected the right way up and securely. You may need to jiggle it around and try it a few times: some of the connectors can be tricky to get on correctly. Try a few times.
Re: Atmos Ai to download To mac dive??
Posted: Sun Aug 07, 2011 9:45 am
by Diver Dude
I did this and i could not find it in my ups drives, do u know what i am doing wrong sorry for the trouble. And THANK YOU for your help!!!
Launch the System Profiler utility, or Apple System Profiler for earlier versions of OS X. This can be accessed by going to the Finder and selecting Applications from the Go menu, then open the Utilities folder.
Select USB under Hardware in the panel to the left and then select the appropriate device from the USB Device Tree.
In the screen shot below (from OS 10.4), the device has a deviceID given by:
Vendor ID: 0x0403
Product ID: 0x6001
Re: Atmos Ai to download To mac dive??
Posted: Sun Aug 07, 2011 10:22 am
by nick
What do you mean couldn't find it ?
After you have installed the USB driver, do this:
1. Plug your device in, and ensure it is in transfer mode.
2. In MacDive, select File -> Download Dives and choose your model.
For (2), you may need to jiggle the connection a bit to get it connected right - they can be tricky. You don't need to use the system profiler.
Re: Atmos Ai to download To mac dive??
Posted: Thu Aug 11, 2011 10:45 pm
by Diver Dude
I must be using wrong cable. Can I use the Aeris Cable or do I need to get a different one.
This the port it selecting /dev/tty.usbserial-20030001 Is this correct?
I am also using lion.
Re: Atmos Ai to download To mac dive??
Posted: Fri Aug 12, 2011 4:45 am
by nick
Typically yes.
Is the device in transfer mode?
Are you sure it is connected properly? This can be tricky on some devices. You may need to try importing a few times and adjusting the cable. Happens to me with a Geo and Atom 3 regularly. The connector has to be on just right for it to work.