MacDive Forums

Hi

Just moved to Mac and have downloaded my recent dives from a Sunnto Vytec DS - I've added a tank and although I can see the average SAC (and dive start and end pressure) I do not get the graph??? Additionally when I look at the raw data I see 0 for the all the temperature and pressure data???

When using the Sunnto PC software I cn see the SAC throughout the dive.

Any thoughts???

Thanks

Tim.

The vytec ds does not record temperature or pressure during the dive - only the beginning and end pressure, and start and deepest temperature.

Hi there

I'm sorry but that is not correct - Pressure is recorded for every depth reading - allowing the Sunnto PC software to display a SAC curve for the dive- you can see the information in the raw data when you import from the Sunnto PC software download. However, when downloading directly to MacDive the information is clearly not there. So same question any thoughts??


Regards

Tim

This question has been covered a number of times -

http://www.mac-dive.com/forum/viewtopic.php?f=2&t=382
http://www.mac-dive.com/forum/viewtopic.php?f=2&t=676
http://www.mac-dive.com/forum/viewtopic.php?f=2&t=530
http://www.mac-dive.com/forum/viewtopic.php?f=2&t=519
http://www.mac-dive.com/forum/viewtopic.php?f=2&t=390