Page 1 of 1
Temperature
Posted: Sat Jan 15, 2011 9:21 am
by bvanant
Migrating a log book from Suunto 3.1.
All the temps, min and max are 32 degrees.
Shouldn't this work. Data is from a Cobra.
Bill
Re: Temperature
Posted: Sat Jan 15, 2011 11:07 am
by nick
If you mean in the raw data (and the smaller graph), no, that data is not recorded on a cobra.
Re: Temperature
Posted: Sat Jan 15, 2011 3:28 pm
by bvanant
No, I mean in the general table as min temp and max temp, they certainly are recorded in the Suunto software but here all the data is 32degrees F. If it were blank I would understand and it gets the air temp correct.
Bill
Re: Temperature
Posted: Sat Jan 15, 2011 5:42 pm
by nick
Can you email me your SDE file to
support@mac-dive.com ?
Re: Temperature
Posted: Sun Jan 16, 2011 5:27 am
by nick
Ah right. The temperatures are only read from an SDE file if they are there per-sample, which of course they aren't for a cobra.
I can put a fix for this in the next version.