Imported dives always start at Number 1

Problems ? Get help here!
Post Reply
mkwiatko
Posts: 9
Joined: Thu Oct 11, 2012 7:45 am
Dive Computer: Shearwater Teric

Imported dives always start at Number 1

Post by mkwiatko »

Importing dives from Shearwater Teric via bluetooth directly to MacDive 2.16.2
I have checked the box "Number dives based on diver".
"Diver" for all dives is the same.

My issue is that the imported dives always start at Dive 1, even though I already have a Dive 1. (I'm up to about 400 dives).
I would think the new dives would be added incrementally in the Dive number count.
I have to manually change the dive number for each new imported dive.
Should I have to do this? Am I missing something?
User avatar
mfupi
Posts: 31
Joined: Tue Jul 19, 2022 12:50 am
Dive Computer: Oceanic VT 4.0

Re: Imported dives always start at Number 1

Post by mfupi »

You can change to "number dives sequentially" since you only have one diver.

You can fix the numbering just by ⌘+a to highlight all the dives and ⌘+r to renumber them.
mkwiatko
Posts: 9
Joined: Thu Oct 11, 2012 7:45 am
Dive Computer: Shearwater Teric

Re: Imported dives always start at Number 1

Post by mkwiatko »

"number dives sequentially" fixed my problem. Thanks!
Post Reply