MacDive Forums

Hi Everyone,
Hopefully I'm not repeating a question (I searched the board and didn't really see a answer out there) - I have an Oceanic ProPlus 2.1, and I finally have the right cable (ordered the wrong one first, for the 2.0) and my ProPlus goes into PC mode as soon as I connect it, but when I try to download dives on macdive, I get the error "Import Error Failed connecting to dive computer on serial port '/dev/tty.usbserial-20030001' (Error Code: -5)"
I have downloaded the correct FTDI drivers and it appears when I look under the USB section of my computers hardware profile, I see that it's recognized the Serial Number (20030001) that appears in the Preference section of MacDives advanced tab, where the serial port is listed. The "Scan" button shows no other options. Any suggestions?

Follow the instructions in this topic: viewtopic.php?f=5&t=407
You need the "atom2" backend for the Pro Plus 2.1.

Thank you, I was wondering which backend was correct.

Here's what i got - A log file was made, but no .dmp. It looks like it's recognizing my USB with my bluetooth in it, but nothing else.

Last login: Thu Oct 28 12:15:41 on ttys000
joel-suracis-computer:~ joelsuraci$ cd Desktop
joel-suracis-computer:Desktop joelsuraci$ chmod u+x atom2
joel-suracis-computer:Desktop joelsuraci$ ls /dev/tty.*
/dev/tty.Bluetooth-Modem /dev/tty.usbserial-20030001
/dev/tty.Bluetooth-PDA-Sync
joel-suracis-computer:Desktop joelsuraci$ ./atom2 /dev/tty.usbserial-20030001
DATETIME 2010-10-28T16:21:59Z (1288282919)
REVISION ca126e9af682d010777c84991821a3ce8c89805d
DEVICE=/dev/tty.usbserial-20030001
oceanic_atom2_device_open
Timeout: value=3000
Sleep: value=100
Flush: queue=3, input=19, output=0
Write: timer=0, size=3, data=a89900, remaining=0
Read: timer=3000, size=0, data=, remaining=0
../../source/src/oceanic_atom2.c:222: Failed to receive the answer.
../../source/examples/oceanic_atom2_test.c:35: Error opening serial port.

SUMMARY
-------
test_dump_memory: Timeout