Temp reading reversed- Aeris Epic

[leo]

Hi there -

I'm using MacDive 2.02 with an Aeris Epic. In my dive log, it appears like the temperature readings are inaccurate and somehow "reversed". What I mean is, on every dive, not only do the temperatures appear to be significantly off, but they are also opposite of what I would expect relative to depth - temperature readings go UP as the dive goes deeper. This happens for both dives that have been downloaded into MacDive directly from the DC as well as dives that have been downloaded to Aeris's Windows PC software and later imported into MacDive.

Any thoughts on what I can do about this? Thanks much!

[nick]

I need you to follow these instructions:

http://www.mac-dive.com/forum/viewtopic.php?f=2&t=407

Using "atom2" and send me the resulting files. I'll take a look.

[nick]

I've just compared another epic in macdive to the aeris software, and the temperatures all look the same.

I can take a look at your data and compare it to verify if you send it through, but I can't see any problems so far.

[nick]

Oh. Yeah. I already fixed this, it's mentioned elsewhere on the forums. So your data probably does look wrong. Will be sorted next patch.