faulty RMV calculations on dives with gas switch
Posted: Mon Jun 03, 2019 3:05 am
Hi,
After updating to 2.10.13 I've noticed that the RMV calculations are off for quite a bit when diving with multiple gasses...
Example:
Total dive time: 74:20
- Air start (bar): 184,50 / Air end: 18,62 (15L tank) for 63:00 at average depth 19,87 meter results in RMV of 13.22 L/min (which is correct)
- Gas switch at 63:00 to EAN78 for the remainder of the dive (11:20): start: 200 bar / end: 170 (7L tank) at average depth 4,78 meter reports RMV of 1,91 L/min (when it should be ± 12 L/min)
As a result the RMV column in the main window erronously shows a combined RMV of 07.11 L/min...
Am I missing something?
P.S Thanks for all the good work
After updating to 2.10.13 I've noticed that the RMV calculations are off for quite a bit when diving with multiple gasses...
Example:
Total dive time: 74:20
- Air start (bar): 184,50 / Air end: 18,62 (15L tank) for 63:00 at average depth 19,87 meter results in RMV of 13.22 L/min (which is correct)
- Gas switch at 63:00 to EAN78 for the remainder of the dive (11:20): start: 200 bar / end: 170 (7L tank) at average depth 4,78 meter reports RMV of 1,91 L/min (when it should be ± 12 L/min)
As a result the RMV column in the main window erronously shows a combined RMV of 07.11 L/min...
Am I missing something?
P.S Thanks for all the good work