Required Test Data
-
- Posts: 2
- Joined: Sun Jun 05, 2011 4:46 pm
- Dive Computer: Nemo Wide
Re: Required Test Data
I have a fresh and not used mares matrix. Do you need test data?
Re: Required Test Data
Yes! The Mares Matrix has never been tested before, so that would be interesting to have. I don't know which backend you'll need for this model, but I guess it's going to be puck. If that doesn't work, try the other mares backends (nemo, darwin, iconhd). Note that I'm on holiday for the next two weeks, so you may not get any response during that time.
libdivecomputer developer
Support the libdivecomputer project with a donation!
http://www.libdivecomputer.org/donate.html
Support the libdivecomputer project with a donation!
http://www.libdivecomputer.org/donate.html
Re: Required Test Data
First post here as I just purchased MacDive as well as a Mares Matrix (recommended by the person at the diving store).TnT wrote:Yes! The Mares Matrix has never been tested before, so that would be interesting to have. I don't know which backend you'll need for this model, but I guess it's going to be puck. If that doesn't work, try the other mares backends (nemo, darwin, iconhd). Note that I'm on holiday for the next two weeks, so you may not get any response during that time.
So I've tried all backends and I get more or less the same errors:
Icon HD, Icon HD Net Ready, Nemo Air, Nemo Wide, Puck, Puck Air : Failed connecting to dive computer on serial port '/dev/tty.SLAB_USBtoUART' (error Code: -5)
Nemo, Nemo Apneist, Nemo Excel, : I have the 'Downloading Data' message but it stays stuck at 0.00% (I then have to unplug the computer). In case you ask, I've waited 45 minutes on one of the tries.
Any suggestions?
PS: let me know if I should start another thread.
- nick
- Site Admin
- Posts: 4374
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Required Test Data
The device is not supported yet. We are working on it.
Send me and Jef an email.
Send me and Jef an email.
- honigferd
- Posts: 64
- Joined: Tue Jul 13, 2010 1:12 am
- Dive Computer: D6, VyperAir, F10 V2
- Location: Pfinztal, Germany
- Contact:
Re: Required Test Data
Hi, finally getting around to record some data (pool only until April though) with the Aeris F10 v2 - would you need any of that?
Re: Required Test Data
The Mares Matrix is now working thanks to Jef! Just got my dives loaded to MacDiv and it looks great!!
- nick
- Site Admin
- Posts: 4374
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Required Test Data
The F10 was added quite some time ago, so no data is necessary unless you are encountering an issue. Cheers!honigferd wrote:Hi, finally getting around to record some data (pool only until April though) with the Aeris F10 v2 - would you need any of that?
- honigferd
- Posts: 64
- Joined: Tue Jul 13, 2010 1:12 am
- Dive Computer: D6, VyperAir, F10 V2
- Location: Pfinztal, Germany
- Contact:
Re: Required Test Data
Alright. Just making sure because the F10 is still on the list. 

- nick
- Site Admin
- Posts: 4374
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Required Test Data
Thanks - I should probably update this. We sorted that some time ago 

-
- Posts: 1
- Joined: Sat Feb 21, 2015 1:05 pm
- Dive Computer: Aeris A300 CS
Re: Required Test Data
Dunno if this thread is still active (doesn't look like it
) but I have dual-transmitter data from an Oceanic Atom 2.0 and an Oceanic OC1.
