MacDive Forums

when i import dives from my OSTC 2N the following items are not synct correctly:
- o2%, i made a few dives with nitrox 32%, but after downloading them mac dive said 21%
- ambient temperature, it's set to 00 in macdive when i download dives from my OSTC

lbmigritor wrote:o2%, i made a few dives with nitrox 32%, but after downloading them mac dive said 21%

I don't remember having that problem with my OSTC but I need to check. Worst case scenario, this will be corrected with the new patch release.

lbmigritor wrote:ambient temperature, it's set to 00 in macdive when i download dives from my OSTC

When I download my dives, Air Temp is always --, then I have High Temp and Low Temp normaly.

From memory the OSTC doesn't record air temperature. As JF says there have been a number of improvements in the next update (because he was helping test and made me fix them all up.. ) so hang tight for another couple of weeks until I get that out.

Hi,
I have another problem with importation: Time duration includes the time spent on surface in the water after the dive.
Example: my OSTC give me 40 minutes of dive time, but I can see from the raw data imported in MacDive that it has recorded the time spent on the surface:
2980, 1.58, 0.00, (null)
2990, 0.95, 0.00, (null)
3000, 0.27, 0.00, (null)
3010, 0.15, 0.00, (null)
3020, 0.22, 0.00, (null)
3030, 0.30, 0.00, (null)
3040, 0.14, 0.00, (null)
3050, 0.27, 0.00, (null)
3060, 0.01, 0.00, (null)
3070, 0.00, 0.00, (null)
3080, 0.00, 0.00, (null)
3090, 0.00, 0.00, (null)
3100, 0.02, 0.00, (null)
And in MacDive I get a 44:50 dive duration

Is there a way to configure MacDive so that it will take into account only the time spent below a certain depth? Or maybe do I have to configure my OSTC in a different way?

Thanks

Cédrick

This is mentioned on the forums already, and is fixed in the next update.

Great, thanks! And sorry for posting answered question.

No problem. Patch should be out in the next few days - almost there.