D9tx Import Problem
Posted: Wed Jan 25, 2012 1:26 pm
So I am trying to download dives from my D9tx and I am getting the error:
Failed connecting to dive computer on serial port '/dev/tty.usbserial-ST000001' (Error Code: -5)
I downloaded the usb driver from http://www.ftdichip.com/Drivers/VCP.htm and installed the 2.2.16 64bit FTDI driver for osx 10.4,5,6.
I did not see 10.7 and I am running Lion.
I also ran the test: http://www.mac-dive.com/forum/viewtopic.php?f=5&t=407 but I don't know if I did it right because there was no d9tx to download - just the d9. So I did it with the d9 and produced a D9.LOG file but no .DMP file.
Any help would be greatly appreciated.
- eliot
Failed connecting to dive computer on serial port '/dev/tty.usbserial-ST000001' (Error Code: -5)
I downloaded the usb driver from http://www.ftdichip.com/Drivers/VCP.htm and installed the 2.2.16 64bit FTDI driver for osx 10.4,5,6.
I did not see 10.7 and I am running Lion.
I also ran the test: http://www.mac-dive.com/forum/viewtopic.php?f=5&t=407 but I don't know if I did it right because there was no d9tx to download - just the d9. So I did it with the d9 and produced a D9.LOG file but no .DMP file.
Any help would be greatly appreciated.
- eliot