Re: Import error - failed to read header information...??
Posted: Fri Aug 12, 2011 12:12 am
That's the same thing I am getting with the aeries, I am using lion too
MacDive Forums
Discussion and Support for MacDive
https://www.mac-dive.com/forum/
Import error - failed to read header information...??
Page 2 of 2
Re: Import error - failed to read header information...??
Posted: Fri Aug 12, 2011 4:45 am
I replied to you in the other thread.
Re: Import error - failed to read header information...??
Posted: Mon Jun 11, 2012 3:17 am
Hi,
I'm on OSx 10.7.3 and macdive 2.1.5, I've already reinstalled USB driver from http://www.ftdichip.com/Drivers/VCP.htm but I still get this error message
The dive computer battery is OK, any idea?
thank you for your help
Cedric
I'm on OSx 10.7.3 and macdive 2.1.5, I've already reinstalled USB driver from http://www.ftdichip.com/Drivers/VCP.htm but I still get this error message
The dive computer battery is OK, any idea?
thank you for your help
Cedric
Re: Import error - failed to read header information...??
Posted: Mon Jun 11, 2012 5:53 am
First, please make sure you have re-downloaded 2.1.5 just in case. I made a mistake (surprising, I know) with the initial release that *may* have caused this issue.
http://www.mac-dive.com/downloads/MacDive_2.1.5.dmg
Otherwise, if your device is in transfer mode and you don't have low battery and it used to work, I would recommend double checking on a windows machine that it downloads as expected. Cable could be faulty or device may have low battery and not be reporting it (my D9 did this with a replacement battery, it didn't last long and unexpectedly died without warning me).
http://www.mac-dive.com/downloads/MacDive_2.1.5.dmg
Otherwise, if your device is in transfer mode and you don't have low battery and it used to work, I would recommend double checking on a windows machine that it downloads as expected. Cable could be faulty or device may have low battery and not be reporting it (my D9 did this with a replacement battery, it didn't last long and unexpectedly died without warning me).
Re: Import error - failed to read header information...??
Posted: Mon Jun 11, 2012 4:48 pm
It works after "re-downloading" the *.dmg 
thank you for your support Nick
thank you for your support Nick
Re: Import error - failed to read header information...??
Posted: Tue Jun 12, 2012 3:57 am
You're welcome - apologies for the inconvenience!
Re: Import error - failed to read header information...??
Posted: Wed Jun 20, 2012 2:01 am
Hallo,
kein auslesen des "HW OSTC 2N" mehr möglich.
Import Error
Failed to read dive computer memory (Error Code: -5)
Mein System:
OSTC 2N V2.21
MacBook 10.7.4
MacDive 2.1.5
Bis MacDive 2.1.4 keine Probleme.
Jemand eine Idee??
---
Hello,
not read the "HW OSTC 2N" possible.
ImportError
Failed to read dive computer memory (Error code: -5)
My system:
OSTC 2N V2.21
MacBook 10.7.4
MacDive 2.1.5
To MacDive 2.1.4 no problems.
Any ideas?
kein auslesen des "HW OSTC 2N" mehr möglich.
Import Error
Failed to read dive computer memory (Error Code: -5)
Mein System:
OSTC 2N V2.21
MacBook 10.7.4
MacDive 2.1.5
Bis MacDive 2.1.4 keine Probleme.
Jemand eine Idee??
---
Hello,
not read the "HW OSTC 2N" possible.
ImportError
Failed to read dive computer memory (Error code: -5)
My system:
OSTC 2N V2.21
MacBook 10.7.4
MacDive 2.1.5
To MacDive 2.1.4 no problems.
Any ideas?
Re: Import error - failed to read header information...??
Posted: Wed Jun 20, 2012 3:32 am
Re: Import error - failed to read header information...??
Posted: Wed Jun 20, 2012 3:48 am
No,nick wrote:Redownload 2.1.5, the issue has been resolved:
http://www.mac-dive.com/downloads/MacDive_2.1.5.dmg
always the same error.
"Import Error
Failed to read dive computer memory (Error Code: -5)"