MacDive Forums

Posted: **Fri Jul 22, 2011 6:18 am**

henrik wrote:Horray! The following USB serial driver works with my Suunto Zoop and MacDive on Mac OSX 10.7 Lion: http://www.silabs.com/Support%20Documen ... Driver.zip. (It creates the serial device /dev/tty.SLAB_USBtoUART)

Thanks ever so much dude!!!! It worked perfectly with my Suunto Gekko.

Cheers, G

Posted: **Fri Jul 22, 2011 3:40 pm**

Hi all,

Is somebody has tested with the official Suunto Cable? in this case is the driver mentioned above is working with this cable?

Posted: **Fri Jul 22, 2011 4:31 pm**

No, it's a different chip. You will need the FTDI driver. As far as I am aware it works fine.

Posted: **Mon Jul 25, 2011 2:48 am**

Has anyone gotten the SmartInterface cable to work under Lion?

/Marcus

Posted: **Mon Jul 25, 2011 3:07 am**

I think I can answer my own question, the driver at http://www.ftdichip.com/Drivers/VCP.htm appears to solve the problem.

/Marcus

Posted: **Tue Jul 26, 2011 2:15 pm**

Hi

Marcus Wendel wrote:I think I can answer my own question, the driver at http://www.ftdichip.com/Drivers/VCP.htm appears to solve the problem.

I can confirm this driver solved the issue for me too. I have a Suunto Vyper 2 with a cheap SmartInterface cable from eBay.

Thanks Marcus.

MacDive Forums

Mac OS X Lion support

Re: Mac OS X Lion support

Re: Mac OS X Lion support

Re: Mac OS X Lion support

Re: Mac OS X Lion support

Re: Mac OS X Lion support

Re: Mac OS X Lion support