Page 2 of 2
Re: Suunto Cobra missing PSI information
Posted: Mon Jun 18, 2012 10:56 pm
by Dolbie
Is this the same story for the Cobra 2?
In MacDive v1 the consumption graph accurately reflected a free flow problem I had with my octo on my last dive.
MacDive v1 showed a spike right around the time in my dive where the problem occurred.
In MacDive v2 this graph is empty.
Re: Suunto Cobra missing PSI information
Posted: Tue Jun 19, 2012 1:31 am
by TnT
The Cobra 2 does record pressure data, so it should show up in macdive.
Re: Suunto Cobra missing PSI information
Posted: Tue Jun 19, 2012 6:19 am
by Dolbie
Hmmm.. Then I guess I have a problem where the SAC is not showing up from a Cobra 2 in MacDive v2.1.5. Any thoughts how to get that back?
Re: Suunto Cobra missing PSI information
Posted: Tue Jun 19, 2012 6:37 am
by nick
There isn't enough information here for me to help you. Have you read the help on managing gases/SAC ?
http://mac-dive.com/help/index.php?titl ... _And_Gases
Everything you need is described in there. If you have no luck, email me your MacDive.sqlite file with a detailed description of which dive(s) are showing the problem and what you have tried after reading the documentation.
Re: Suunto Cobra missing PSI information
Posted: Tue Jun 19, 2012 6:59 am
by Dolbie
Ah, got it. I guess I didn't need to enter that info in v1.
Now the graph is there.
Thanks for the help.
Re: Suunto Cobra missing PSI information
Posted: Tue Jun 19, 2012 7:16 am
by nick
V1 only had a tank size/working pressure per dive. 2.x.x didn't even have multiple tanks until recently, so all of this has changed a couple of times and is pretty different these days.
Much more flexible though. You can assign a default tank via File -> Manage Tanks/Gases which will be used, so for the most part things will be automatic on future imports.