Suunto D9tx data import issue
Suunto D9tx data import issue
I am using Suunto D9tx (version 1.2.10) and found some data record are missing. For example, I have a transmitter connected with my tank but the SAC rate is always zero shows in MacDive. I connect my D9tx to Suunto DM5 software and it do show the SAC rate. It prove the problem is not on computer side but MacDive. Another issue is when I dive with Nitrox by Mixed mode (D9tx use Mixed mode instead of Nitrox mode for Nitrox dive), however the PPO2 is also always zero in RAW data tab and CNS% displayed Gases tab is incorrect (in my case always show like 221%). But the PPO2 do show correctly in AIR dive mode. Hope there is a chance those issues can be fixed.
- nick
- Site Admin
- Posts: 4363
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Suunto D9tx data import issue
It may just show that you haven't configured your tank properly. Go to the Gas tab of the dive inspector. You can see what tank is specified. Then go to manage tanks/gases and make sure it has a size and working pressure specified. Otherwise you will not get SAC.ICDiver wrote:I am using Suunto D9tx (version 1.2.10) and found some data record are missing. For example, I have a transmitter connected with my tank but the SAC rate is always zero shows in MacDive. I connect my D9tx to Suunto DM5 software and it do show the SAC rate. It prove the problem is not on computer side but MacDive.
By default the SAC should work, but if you have changed tanks etc you have to make sure they have values filled out. If that is not the case, I need to see your data - your description doesn't give me enough info.
Can you just send me your MacDive.sqlite data file, and also the SDM database backup? The CNS I can look in to (this changes from device to device, and sometimes firmware versions). It's probably just a small bug in MacDive.Another issue is when I dive with Nitrox by Mixed mode (D9tx use Mixed mode instead of Nitrox mode for Nitrox dive), however the PPO2 is also always zero in RAW data tab and CNS% displayed Gases tab is incorrect (in my case always show like 221%). But the PPO2 do show correctly in AIR dive mode. Hope there is a chance those issues can be fixed.
PPO2 should be calculated, but I will have to double check. Please send me the data and I will get back to you.
Thanks.
-
- Posts: 1
- Joined: Fri Dec 15, 2017 9:58 pm
- Dive Computer: Mares Icon
Re: Suunto D9tx data import issue
nick, thanx a lot for this response. It is very useful information
Hello, guys! After this diving season I want to visit canadian grand prix races to have a rest. I hope that will be amazing