I have an OSTC 2N and used Maldive without problem
Since this morning I cannot download new dives, I have a message "Could not detect a valid serial port"
So I tried to reinstall the FTDI driver
the installation said it was successful but there is no change it seems that it is not installed !!
I am running Mac OS Yosemite 10.10.5
Could you help me ?
Thanks
OSTC 2N
-
nick
- Site Admin
- Posts: 4376
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: OSTC 2N
Hi there,
Try rebooting as well, sometimes it doesn't start up properly after an install.
You can also try another USB cable.
Try rebooting as well, sometimes it doesn't start up properly after an install.
You can also try another USB cable.
-
xiphias
- Posts: 7
- Joined: Sun Apr 24, 2011 12:09 pm
- Dive Computer: OSTC 2N
- Location: Capbreton France
Re: OSTC 2N
I have tried to reboot and change the USB cable with no successnick wrote:Hi there,
Try rebooting as well, sometimes it doesn't start up properly after an install.
You can also try another USB cable.
Originally my USB cable was connected via a HUB and has been working normally for months.
I connected it directly to the computer and now it works !!
Thanks
-
nick
- Site Admin
- Posts: 4376
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: OSTC 2N
Ah, yeah - USB hubs can cause issues.
Glad you figured it out
Glad you figured it out