Nick,
Many thanks for showing the Raw data, because it identified a problem with my GEKKO.. it's been "self diving" on me. Fortunately I'm 1y11m into my 2y warranty to I get a repair/replace (and the GEKKO is OOP so I'll likely get the ZOOP out of the deal!)
At the end of a few of my recent dives, I get a surface "alert" at xxxx samples, but it then continues to show depth of .33 for yyyy samples after it. IE one of my dives ended at 38:50 after entering the water, but the computer carried on logging depth of .33 until 83:50.. the delta suspiciously is the SIT time until I next went to depth > .33.
As this "buggers up" the profile on the printout ("compresses" the curve due to the .33 outliers for 0h45m), I was wondering if I can delete the 'errant' data? If not, no biggie, but I thought I'd ask.
Asking here as I'm sure that the need may come up again for others.
Thx,
B.
Manually editing raw data
-
- Posts: 11
- Joined: Tue May 17, 2011 2:40 am
- Dive Computer: Suunto Gekko
- nick
- Site Admin
- Posts: 4363
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Manually editing raw data
Not currently but I could look at adding something like that.
-
- Posts: 11
- Joined: Tue May 17, 2011 2:40 am
- Dive Computer: Suunto Gekko
Re: Manually editing raw data
Nick,
If that functionality comes with time, that would be great. However, I'm sure there are other, more pressing features you'd like to to get in first.
Best,
B.
If that functionality comes with time, that would be great. However, I'm sure there are other, more pressing features you'd like to to get in first.
Best,
B.