Place to enter gradient factors

Suggestions? Comments? Features you'd like to see?
Post Reply
richiewrt
Posts: 14
Joined: Sat May 31, 2014 6:43 am
Dive Computer: Petrel 2

Place to enter gradient factors

Post by richiewrt » Mon Oct 24, 2016 8:48 am

I am getting ready to start doing decompression diving, and I use GF and plan to adjust GF depending on the dive. Is see where the deco algorithm is pulled in from the dive computer, is there a place where it pulls in the set GF's? If not is there a chance of getting that field added in a future update? Is that data even downloadable from the computer?

User avatar
nick
Site Admin
Posts: 4252
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Place to enter gradient factors

Post by nick » Mon Oct 24, 2016 11:17 am

Some computers provide this. I will look at adding them in a future update, it requires a database change so will have to wait for a number of other things first.

Jean-Francois
Posts: 176
Joined: Tue Jul 19, 2011 4:47 pm
Dive Computer: Perdix

Re: Place to enter gradient factors

Post by Jean-Francois » Sat Oct 29, 2016 6:23 pm

richiewrt wrote:I am getting ready to start doing decompression diving, and I use GF and plan to adjust GF depending on the dive. Is see where the deco algorithm is pulled in from the dive computer, is there a place where it pulls in the set GF's? If not is there a chance of getting that field added in a future update? Is that data even downloadable from the computer?
Good idea. In the meantime you can use this work around :

Open the dive inspector, under the General tab you have a field called Decompression Algorithm.
Choose the appropriate decompression algorithm and add the appropriate value.

For example : ZHL-L16-GF (which you get from the drop down menu) 80/80 (your value for the low GF and the high GF) you can even add OC or CC.
Typically my Decompression Algorithm field looks like this : ZHL-L16-GF CC xx/xx

Bollar
Posts: 50
Joined: Mon Nov 20, 2017 10:29 am
Dive Computer: Shearwater Perdix AI

Re: Place to enter gradient factors

Post by Bollar » Sun Feb 21, 2021 7:12 am

A +1 for this. I currently enter the text manually like ZHL-16C GF 40/85. If I could just have one of my prior selections remembered as a dropdown, that would be fine with me.

User avatar
nick
Site Admin
Posts: 4252
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Place to enter gradient factors

Post by nick » Sun Feb 21, 2021 7:26 am

If you are using a Shearwater as your info suggests, then this has been the case for quite some time already (the deco model will be populated with the GF's). The next release has separate fields for them as well.

Bollar
Posts: 50
Joined: Mon Nov 20, 2017 10:29 am
Dive Computer: Shearwater Perdix AI

Re: Place to enter gradient factors

Post by Bollar » Tue Mar 16, 2021 11:01 pm

nick wrote:
Sun Feb 21, 2021 7:26 am
If you are using a Shearwater as your info suggests, then this has been the case for quite some time already (the deco model will be populated with the GF's). The next release has separate fields for them as well.
Yes & thanks.

I also have a Suunto Eon Steel with the Buhlmann upgrade. I can set the gradient factors manually on the computer, but it uploads as just "Buhlmann."

Image
https://www.dropbox.com/s/dpp84rcqmt1nt ... M.png?dl=0

Post Reply