Import error on Hollis DG03

Problems ? Get help here!
Post Reply
bswinburn
Posts: 2
Joined: Mon Nov 23, 2020 3:36 am
Dive Computer: Hollis DG03

Import error on Hollis DG03

Post by bswinburn »

After using mac dive with this computer without problems for several years I'm getting the error "Failed to read dive computer memory (Error Code: -9).

Tried restarting a couple of times. Google isn't helping much.

Any ideas what to do?
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Import error on Hollis DG03

Post by nick »

Make sure your battery is not low. Make sure your cable is not damaged/dirty, and is plugged in correctly etc. Usually "it used to work fine" means low battery. If I recall the DG03 cable is one of those that plugs in to the dive comp both ways, but only works one way - make sure it is not upside down.
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Import error on Hollis DG03

Post by nick »

Actually this specific error may be something else -

Can you please go Tools > Send Diagnostic Info, choose Oceanic Atom 2 as the device, click Begin, etc etc then email me the results.
bswinburn
Posts: 2
Joined: Mon Nov 23, 2020 3:36 am
Dive Computer: Hollis DG03

Re: Import error on Hollis DG03

Post by bswinburn »

Just sent the diagnostic info. Hope you find something, thanks!
Post Reply