Hi!
I'm using a Mares Icon HD, and are now trying to get all my dives into the software, First i had some connection issues but all that's sorted through.
However, when downloading commences the percentage loads up too around 100%, the first time it reached 100%, then loaded for a couple of seconds and then crashed, the attempt afterward it reached 99.71% and then crashed, not always 99.71, but 99ish, but most of the time 99.71. After a reboot it goes to 100% and loads for a couple of seconds crashes and it starts over with 99%ish results.
Also I'm running Lion.
http://www.mac-dive.com/forum/viewtopic.php?f=5&t=407
I've done everything in the post above and an email is on the way right after i post this along with the crash log.
/Adam
Icon HD, MacDive crashes at 99% of sync
- nick
- Site Admin
- Posts: 4363
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Icon HD, MacDive crashes at 99% of sync
Thanks for sending your data, but the issue here is that your device is not yet supported.
We're working on it, and the data will help.
We're working on it, and the data will help.
Re: Icon HD, MacDive crashes at 99% of sync
Hi i recieved your email, The device i'm trying to sync with is NOT the NET Ready version it's one of the first Icon HD availible from the first generation, over a year old (or more)
I am running the 2.01 firmware if that might cause any problems though.
Please correct me if that generation of the device is not supported unlike what it says under the 'supported devices' list.
I'm trying to sync it before turning it in for an upgrade.
Also thanks for a quick response
I am running the 2.01 firmware if that might cause any problems though.
Please correct me if that generation of the device is not supported unlike what it says under the 'supported devices' list.
I'm trying to sync it before turning it in for an upgrade.
Also thanks for a quick response
- nick
- Site Admin
- Posts: 4363
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Icon HD, MacDive crashes at 99% of sync
Ah, ok. Your profile says it is a net ready (well, NET).
I will have a look at the data after work tonight and see what is going on. There have been a couple of minor improvements to reading from Icons in the next update, which is due out next week. That may or may not fix your issue. At any rate, I will get back to you later on once I've had a chance to investigate. Apologies for the mixup.
I will have a look at the data after work tonight and see what is going on. There have been a couple of minor improvements to reading from Icons in the next update, which is due out next week. That may or may not fix your issue. At any rate, I will get back to you later on once I've had a chance to investigate. Apologies for the mixup.
Re: Icon HD, MacDive crashes at 99% of sync
I'm sorry for the mixup, i'm currently sitting with both devices in my hands so i didn't know what to write down. Thus the missing *Ready*