Page 1 of 1
Cannot read memory with nemo wide
Posted: Tue Mar 23, 2010 6:06 am
by mariopsr
I am using MacDive 1.5.3 with Mac OSX 10.6.2. I installed previously CP210X as suggested. Everything was working perfectly. However, suddenly I got "Cannot read memory " message. I have reinstalled CP210X driver. I also check the serial port says "/dev/tty.SLAB_USBtoUART". I would appreciate any clue to make it working again.
Thanks!!!
Re: Cannot read memory with nemo wide
Posted: Tue Mar 23, 2010 1:55 pm
by nick
Can you follow the instructions in this thread:
http://forum.mac-dive.com/viewtopic.php?f=3&t=14
But use "puck" instead of "vyper2" ?
Re: Cannot read memory with nemo wide
Posted: Tue Mar 23, 2010 6:15 pm
by mariopsr
Thanks a lot,
I have downloaded the puck program. I will follow the instructions as soon as I get home and I will send you the files.
Re: Cannot read memory with nemo wide
Posted: Tue Mar 23, 2010 8:48 pm
by nick
Cool - thanks! Let me know if you have any problems.
Re: Cannot read memory with nemo wide
Posted: Wed Mar 24, 2010 8:41 am
by mariopsr
I send you a file by email. I guess I was not lucky. I didn't get the two expected files
thanks for your help
mariopsr