MacDive Forums

First, Thank you 1000x for making MacDive, I use it regularly with my Oceanic VT3 and it's perfect for my recreational and light technical diving.

My wife has an Atom2.0 dive computer. Last week my wife took it diving for 16 total dives in two series of repetitive dives. There were four repetitive dives a 24 hour break and then the other 12 dives. I can only download the 4 most recent dives from the Atom2.0 before getting the error, "Cannot Read Memory".

Thus far I've double checked that "Only download most recent" is not checked
I've tried on two different MacBooks
I have verified I am running FTDIchip's 2.2.14 drivers

I don't really know what to try next. I even deleted MacDive and reinstalled with little, if any changes.

Any assistance would be greatly appreciated.

Thanks in advance,
Michael

Can you run the test application? Follow the instructions here:

http://www.mac-dive.com/forum/viewtopic.php?p=78#p78

And just replace everything "vyper2" with "atom2".

I emailed you the results of the testing procedure, I was unable to get a dump file. The terminal window said, protocol error.