customidea.dot cable
Serial port dev/tty.SLAB_USBto UART (the other is a wifi driver)
downloaded FTDUSBSerialDriver_v2_16.dmg
and then the ...10-4_10-5_10-6 version
10 secs after trying to download I get 'failed to read header - error code-5'
Thanks for advice
Tried and tried... still get error -5
Re: Tried and tried... still get error -5
Should have said I have a Vyper 2 using Mac Lion
-
nick
- Site Admin
- Posts: 4363
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Tried and tried... still get error -5
You are installing the wrong USB driver. Check the devices page: http://www.mac-dive.com/devices.php
When you click Suunto, there is a link specifically for the Custom Idea cable. You want their USB driver, not the FTDI one. And actually, there are reports that the original SiLabs driver is more reliable so you may just want to jump straight to that, which can be found here:
http://www.silabs.com/products/mcu/Page ... ivers.aspx
When you click Suunto, there is a link specifically for the Custom Idea cable. You want their USB driver, not the FTDI one. And actually, there are reports that the original SiLabs driver is more reliable so you may just want to jump straight to that, which can be found here:
http://www.silabs.com/products/mcu/Page ... ivers.aspx