Import errors with OSTC 2n

Problems ? Get help here!
Post Reply
lbmigritor
Posts: 16
Joined: Mon Nov 28, 2011 7:11 am
Dive Computer: OSTC 2n

Import errors with OSTC 2n

Post by lbmigritor »

when i import dives from my OSTC 2N the following items are not synct correctly:
- o2%, i made a few dives with nitrox 32%, but after downloading them mac dive said 21%
- ambient temperature, it's set to 00 in macdive when i download dives from my OSTC
Jean-Francois
Posts: 178
Joined: Tue Jul 19, 2011 4:47 pm
Dive Computer: Perdix

Re: Import errors with OSTC 2n

Post by Jean-Francois »

lbmigritor wrote:o2%, i made a few dives with nitrox 32%, but after downloading them mac dive said 21%
I don't remember having that problem with my OSTC but I need to check. Worst case scenario, this will be corrected with the new patch release.
lbmigritor wrote:ambient temperature, it's set to 00 in macdive when i download dives from my OSTC
When I download my dives, Air Temp is always --, then I have High Temp and Low Temp normaly.
User avatar
nick
Site Admin
Posts: 4363
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Import errors with OSTC 2n

Post by nick »

From memory the OSTC doesn't record air temperature. As JF says there have been a number of improvements in the next update (because he was helping test and made me fix them all up.. :) ) so hang tight for another couple of weeks until I get that out.
7rick
Posts: 3
Joined: Tue Feb 21, 2012 5:24 am
Dive Computer: OSTC

Re: Import errors with OSTC 2n

Post by 7rick »

Hi,
I have another problem with importation: Time duration includes the time spent on surface in the water after the dive.
Example: my OSTC give me 40 minutes of dive time, but I can see from the raw data imported in MacDive that it has recorded the time spent on the surface:
2980, 1.58, 0.00, (null)
2990, 0.95, 0.00, (null)
3000, 0.27, 0.00, (null)
3010, 0.15, 0.00, (null)
3020, 0.22, 0.00, (null)
3030, 0.30, 0.00, (null)
3040, 0.14, 0.00, (null)
3050, 0.27, 0.00, (null)
3060, 0.01, 0.00, (null)
3070, 0.00, 0.00, (null)
3080, 0.00, 0.00, (null)
3090, 0.00, 0.00, (null)
3100, 0.02, 0.00, (null)
And in MacDive I get a 44:50 dive duration

Is there a way to configure MacDive so that it will take into account only the time spent below a certain depth? Or maybe do I have to configure my OSTC in a different way?

Thanks

Cédrick
User avatar
nick
Site Admin
Posts: 4363
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Import errors with OSTC 2n

Post by nick »

This is mentioned on the forums already, and is fixed in the next update.
7rick
Posts: 3
Joined: Tue Feb 21, 2012 5:24 am
Dive Computer: OSTC

Re: Import errors with OSTC 2n

Post by 7rick »

Great, thanks! And sorry for posting answered question.
User avatar
nick
Site Admin
Posts: 4363
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Import errors with OSTC 2n

Post by nick »

No problem. Patch should be out in the next few days - almost there.
Post Reply