Suunto Gekko download problem

[Djonah Inc.]

I get the failed message toooo...grrr... connected to windows, no problems.
The connection was always dodgy when using macdive (not as good as suunto dm) but I'm on mac and recently upgraded to lion.

DATETIME 2011-12-09T16:51:13Z (1323449473)
REVISION 069797a08250262b19a84c9308ec7fbca3235fa2
DEVICE=/dev/tty.usbserial, DELAY=500
suunto_vyper_device_open
Configure: baudrate=2400, databits=8, parity=2, stopbits=1, flowcontrol=0
Timeout: value=1000
DTR: value=1
Sleep: value=100
Flush: queue=3, input=0, output=0
device_foreach
Sleep: value=500
RTS: value=1
Write: timer=0, size=5, data=0500161407, remaining=0
Sleep: value=200
Flush: queue=1, input=0, output=0
RTS: value=0
Read: timer=1001, size=0, data=, remaining=0
../../source/src/suunto_vyper.c:256: Failed to receive the answer.
../../source/examples/suunto_vyper_test.c:47: Cannot read dives.
suunto_vyper_device_open
Configure: baudrate=2400, databits=8, parity=2, stopbits=1, flowcontrol=0
Timeout: value=1000
DTR: value=1
Sleep: value=100
Flush: queue=3, input=0, output=0
device_dump
Sleep: value=500
RTS: value=1
Write: timer=0, size=5, data=0500002025, remaining=0
Sleep: value=200
Flush: queue=1, input=0, output=0
RTS: value=0
Read: timer=1000, size=0, data=, remaining=0
../../source/src/suunto_vyper.c:256: Failed to receive the answer.
../../source/examples/suunto_vyper_test.c:82: Cannot read memory.

SUMMARY
-------
test_dump_sdm: Timeout
test_dump_memory: Timeout

[TnT]

Can you try the windows version of the test application?

What type of cable are you using? The official Suunto cable, Smartinterface, customidea, or a DIY version?