Macdive iOS no longer pulling the selected transmitter on the Teric

Problems ? Get help here!
Post Reply
ManateDiver
Posts: 28
Joined: Mon Jul 22, 2019 10:19 pm
Dive Computer: Shearwater Teric

Macdive iOS no longer pulling the selected transmitter on the Teric

Post by ManateDiver »

I had a work around for Macdive not showing the second transmitter's numbers, but setting my back up computer to use the second transmitter as the source for the GTR/SAC numbers, it made Macdive pull those numbers and use those for the RMV/SAC calculations.
Screen Shot 2019-11-27 at 4.01.33 PM.png
Screen Shot 2019-11-27 at 4.01.44 PM.png
Now the downloads for both computers is showing the exact same start and end numbers showing that they are pulling up the same transmitter.
Attachments
Screen Shot 2019-11-27 at 4.00.51 PM.png
ManateDiver
Posts: 28
Joined: Mon Jul 22, 2019 10:19 pm
Dive Computer: Shearwater Teric

Re: Macdive iOS no longer pulling the selected transmitter on the Teric

Post by ManateDiver »

Can't attach the second image, but imagine basically the same as the third image but with slightly different dive times.
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Macdive iOS no longer pulling the selected transmitter on the Teric

Post by nick »

It's not supported, it's on the TODO list.
ManateDiver
Posts: 28
Joined: Mon Jul 22, 2019 10:19 pm
Dive Computer: Shearwater Teric

Re: Macdive iOS no longer pulling the selected transmitter on the Teric

Post by ManateDiver »

nick wrote: Thu Nov 28, 2019 6:33 am It's not supported, it's on the TODO list.
Why am I getting two different numbers between the computers?

The two top images are the same dive using two different computers, one computer has T1 set as the primary transmitter but is listening to both transmitters. While the other has T2 as the primary again listening to two different transmitters.
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Macdive iOS no longer pulling the selected transmitter on the Teric

Post by nick »

Because the primary is used?
Post Reply