Can't add below zero temperatures.

MacDive for iPhone. Feedback, requests, bug reports.. let us know!
Post Reply
Amog
Posts: 7
Joined: Thu Jan 18, 2018 11:25 pm
Dive Computer: Shearwater JJ-CCR

Can't add below zero temperatures.

Post by Amog » Fri Nov 08, 2019 5:47 am

Hi. I do about half my diving in sub-zero degrees, but the iPhone app does not allow me to add a "-" in front of the temperature. It gives me a numeric keypad with no signs. It's handy with a numeric keypad when it's just numbers, but I can't put the correct temperature (mainly for air, since the water temperature usually gets populated from the computer).

User avatar
nick
Site Admin
Posts: 4028
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Can't add below zero temperatures.

Post by nick » Fri Nov 08, 2019 6:01 am

Thanks for the report. Will look in to it.

User avatar
nick
Site Admin
Posts: 4028
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Can't add below zero temperatures.

Post by nick » Tue Nov 12, 2019 4:30 am

Indeed, the standard numeric keypad does not include a +/- toggle. I hadn't noticed that at all. I've added a new toggle button above the keyboard (this seemed preferable to using a full keyboard), so that will be in the next update. I've done this for the high/low temp and the air temp.

Feel free to drop me an email if you'd like to try a beta version out in the meantime.

Post Reply