MacDive Forums

Discussion and Support for MacDive
It is currently Thu Sep 21, 2017 2:26 am

All times are UTC + 8 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Mon May 29, 2017 8:16 am 
Offline

Joined: Mon May 29, 2017 7:42 am
Posts: 1
Dive Computer: D9tx
I am using Suunto D9tx (version 1.2.10) and found some data record are missing. For example, I have a transmitter connected with my tank but the SAC rate is always zero shows in MacDive. I connect my D9tx to Suunto DM5 software and it do show the SAC rate. It prove the problem is not on computer side but MacDive. Another issue is when I dive with Nitrox by Mixed mode (D9tx use Mixed mode instead of Nitrox mode for Nitrox dive), however the PPO2 is also always zero in RAW data tab and CNS% displayed Gases tab is incorrect (in my case always show like 221%). But the PPO2 do show correctly in AIR dive mode. Hope there is a chance those issues can be fixed.


Top
 Profile  
 
PostPosted: Mon May 29, 2017 8:23 am 
Offline
Site Admin
User avatar

Joined: Sat Apr 12, 2008 8:33 am
Posts: 3453
Dive Computer: Shearwater Perdix AI
ICDiver wrote:
I am using Suunto D9tx (version 1.2.10) and found some data record are missing. For example, I have a transmitter connected with my tank but the SAC rate is always zero shows in MacDive. I connect my D9tx to Suunto DM5 software and it do show the SAC rate. It prove the problem is not on computer side but MacDive.


It may just show that you haven't configured your tank properly. Go to the Gas tab of the dive inspector. You can see what tank is specified. Then go to manage tanks/gases and make sure it has a size and working pressure specified. Otherwise you will not get SAC.

By default the SAC should work, but if you have changed tanks etc you have to make sure they have values filled out. If that is not the case, I need to see your data - your description doesn't give me enough info.

Quote:
Another issue is when I dive with Nitrox by Mixed mode (D9tx use Mixed mode instead of Nitrox mode for Nitrox dive), however the PPO2 is also always zero in RAW data tab and CNS% displayed Gases tab is incorrect (in my case always show like 221%). But the PPO2 do show correctly in AIR dive mode. Hope there is a chance those issues can be fixed.


Can you just send me your MacDive.sqlite data file, and also the SDM database backup? The CNS I can look in to (this changes from device to device, and sometimes firmware versions). It's probably just a small bug in MacDive.

PPO2 should be calculated, but I will have to double check. Please send me the data and I will get back to you.

Thanks.

_________________
http://www.mac-dive.com : support@mac-dive.com : @MacDiveApp


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group