MacDive Forums
http://www.mac-dive.com/forum/

2.7.0 – highlight fast ascents
http://www.mac-dive.com/forum/viewtopic.php?f=5&t=2161
Page 1 of 1

Author:  stixer [ Mon Aug 22, 2016 12:36 pm ]
Post subject:  2.7.0 – highlight fast ascents

Hi.

First, i like the new overlay of the data (ppo2, n2 temp …).

But why i get a highlighted fast ascent display on the graph from 2 or 3 m/min (orange)?
On 8 or 9 m/min its even red… of course there is no explicit warning, but still it´s marked.

Btw., a nice feature would be the graph display of the deco stages like in Shearwater Desktop…

Best, Alex!

Attachments:
Bildschirmfoto 2016-08-22 um 06.32.48.png
Bildschirmfoto 2016-08-22 um 06.32.48.png [ 243.23 KiB | Viewed 4553 times ]

Author:  nick [ Mon Aug 22, 2016 1:00 pm ]
Post subject:  Re: 2.7.0 – highlight fast ascents

They're just standard conservative rates for ascent speed. If you don't want to see it, you can turn it off via View > Highlight Fast Ascents.

Author:  Moleshome [ Sat Jun 03, 2017 12:32 am ]
Post subject:  Re: 2.7.0 – highlight fast ascents

Hi there, new user and first time poster so I may have got this totally wrong.

I'm getting weird stuff showing up in the detail box, orange fast ascents with low m/min including at least one showing a negative ascent.

Screenshot attached

Attachments:
Screen Shot 2017-06-02 at 17.27.27.png
Screen Shot 2017-06-02 at 17.27.27.png [ 48.61 KiB | Viewed 2399 times ]

Author:  nick [ Sat Jun 03, 2017 5:23 am ]
Post subject:  Re: 2.7.0 – highlight fast ascents

Usually this is just a slight mismatch in where the point actually falls, vs where your mouse is, and the smoothing of the profile. Move to the right slightly and it should make more sense.

Author:  Moleshome [ Sat Jun 03, 2017 5:33 am ]
Post subject:  Re: 2.7.0 – highlight fast ascents

Going to the right gives me:
Attachment:
Screen Shot 2017-06-02 at 22.30.20.png
Screen Shot 2017-06-02 at 22.30.20.png [ 50.58 KiB | Viewed 2397 times ]

Attachment:
Screen Shot 2017-06-02 at 22.30.58.png
Screen Shot 2017-06-02 at 22.30.58.png [ 47.02 KiB | Viewed 2397 times ]


Which makes even less sense to me.

Author:  nick [ Sat Jun 03, 2017 5:36 am ]
Post subject:  Re: 2.7.0 – highlight fast ascents

Ok - sorry. Maybe it's just broken.

Author:  Moleshome [ Sat Jun 03, 2017 5:52 am ]
Post subject:  Re: 2.7.0 – highlight fast ascents

:D

The reason I was looking was that these are from my open water qualification dives. When I looked at the log file from the dive where I did my CESA it showed as red but with an ascent rate of 0.69m/min and I was struggling to see a) how 0.69m/min was a fast ascent and b) how I could possibly have been going that slow.

Attachments:
Screen Shot 2017-06-02 at 22.42.12.png
Screen Shot 2017-06-02 at 22.42.12.png [ 34.72 KiB | Viewed 2397 times ]

Author:  nick [ Sat Jun 03, 2017 5:55 am ]
Post subject:  Re: 2.7.0 – highlight fast ascents

Thanks for your feedback. We will look in to it.

Author:  Moleshome [ Sat Jun 03, 2017 6:10 am ]
Post subject:  Re: 2.7.0 – highlight fast ascents

No worries, if the logs would help just let me know.

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/