MacDive Forums

Discussion and Support for MacDive
It is currently Sat Nov 25, 2017 3:45 pm

All times are UTC + 8 hours




Post new topic Reply to topic  [ 15 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Tue Aug 02, 2016 3:49 pm 
Offline
Site Admin
User avatar

Joined: Sat Apr 12, 2008 8:33 am
Posts: 3496
Dive Computer: Shearwater Perdix AI
Hey there,

This is a release announcement. Please start a new thread in Support or Requests if you have problems or requests.

Some new releases. Signature has been added to the iPhone, as very much requested, and I made a couple of small updates to the Desktop while I was at it.

1.1.4 for iOS
New Features:
  • Added ability to capture and sync Signatures from your buddy or divemaster.
  • Photos can now be viewed in landscape.
  • Added import for the Oceanic Veo 2 (via DC Buddy)
  • Added support for new smart log criteria.
  • Added some statistics to the Sites list.

Bug Fixes:
  • Fixed issue where image popups on the profile were low resolution.
  • Fixed issue where inactive gear was added to new dives.

2.7.0 for Mac
New Features:
  • Redesigned Profile Graph.
  • Redesigned Statistics graphs.
  • Added Critters.
  • Added Critter and Critter Category smart log criteria.
  • CoverFlow and Profile Images now show any tagged Critters.
  • Updated all maps to use Apple Maps.
  • Replaced “Average SAC” graph with “Average Bottom Time”.
  • Added support for the Aqualung i300.
  • Added support for the HeinrichsWeikamp OSTC 4.
  • Added support for new OSTC 2 variant.
  • Improved support for handling multiple gases.
  • Improved support for the Suunto DX.
  • Improved support for Seabear devices.
  • Improved support for the Suunto EON Steel.
  • Read PPO2 from the Cobalt.
  • When merging dives, only create one tank if the dives use the same gas.
  • Improved support for reading gas mixes from the Hollis TX1.
  • Improved repetitive dive/surface interval calculation for some devices.
  • Added support for “Prefer Bottom Time” preference when reading from some Mares devices.
  • Double-clicking on an image in the Certification, Gear or Site inspector now opens the image in Preview.
  • Double-clicking on a row in the Sites table view now opens the inspector.
  • Improved retina support in some places that were missing it.
  • Improved thumbnails in Sites view.
  • AutoMerge now copies Signature.
  • “Next Dive” and “Previous Dive” in the Dive Inspector replaced with up/down arrows.
  • Improved Site/Gear thumbnails display/loading in Thumbnail view.
  • Many minor performance improvements.
  • Many minor visual improvements.

Bug Fixes:
  • Fixed reading dates for certain Oceanic devices.
  • Fixed reading gas changes for some newer Suunto firmwares.
  • Fixed issue downloading from a Suunto D6i in some cases.
  • Fixed issue exporting DAN files in certain cases.
  • Fixed issue reading multiple tanks from an Icon HD.
  • Fixed surface interval display.
  • Fixed issue where profile bookmarks/images might not display immediately.
  • Fixed issue where cloud preferences could be disabled after registering, until restarting app.
  • Fixed issue where profile images wouldn’t appear immediately.
  • Fixed some issues with incorrect statistics in certain cases.
  • Fixed issue where site thumbnails would not display after filtering.
  • Fixed issue where Undo was sometimes disabled, even though it was available.
  • Fixed crash printing logs in certain cases.
  • Fixed numerous minor display issues.
  • Misc minor bug fixes.


Please accept my apologies in advance - this is a pretty big update internally, I expect there will be some issues here and there. Drop me an email with any crash reports and your user data and I'll get any problems resolved ASAP. Hopefully there is something for everyone.

I've been pretty excited to get this updated released. I hope you enjoy it.

Cheers.
-nick

_________________
http://www.mac-dive.com : support@mac-dive.com : @MacDiveApp


Top
 Profile  
 
PostPosted: Fri Aug 05, 2016 10:01 pm 
Offline

Joined: Fri Aug 05, 2016 9:55 pm
Posts: 3
Dive Computer: Petrel 2
Really nice profile graph redesign. Not sure if this is included and I just don't know how to do it, or if it's an upcoming project, but is there any way of automatically including decompression profiles into that graph? I see that there is now an NDT graph available, but once it reaches zero, there is no more information. Specifically, can it show the ceiling?

What I do now is download my dives using Shearwater Desktop, and then take a screen shot of that graph and include it in the photo field for decompression dives (see attached).

Thanks, as always for an awesome product!

Mike


Attachments:
dive_20160610_1.png
dive_20160610_1.png [ 248.56 KiB | Viewed 6726 times ]
Top
 Profile  
 
 Post subject: Critter Size
PostPosted: Sat Aug 06, 2016 11:10 pm 
Offline

Joined: Sun Sep 11, 2011 3:14 am
Posts: 13
Dive Computer: Suunto & Cobalt
Nick,

I live in the U.S.and am still stuck on the imperial system. Your new critters module for MacDive allows us to enter critter sizes but only in cm. Can you please modify this to allow Imperial users to enter inches/feet?

Also, I noted in your release comments that you had made changes to the Eon Steel interface. What specific changes were made? With respect to temp, MacDive does not recognize air temp. Every download shows 32 degrees Fahrenheit. How do I get MacDive to recognize the actual temperature?

Thanks and congrats on an amazing upgrade. I am a power Mac user and MacDive is hands down my favorite program. Can wait to see an iPad release!

Eric


Top
 Profile  
 
 Post subject: Re: Critter Size
PostPosted: Sun Aug 07, 2016 4:05 am 
Offline
Site Admin
User avatar

Joined: Sat Apr 12, 2008 8:33 am
Posts: 3496
Dive Computer: Shearwater Perdix AI
Foolishcfo wrote:
Also, I noted in your release comments that you had made changes to the Eon Steel interface. What specific changes were made? With respect to temp, MacDive does not recognize air temp. Every download shows 32 degrees Fahrenheit. How do I get MacDive to recognize the actual temperature?


Support for gas switches, reads tank info if possible, better alarm handling, the PPO2 is now calculated for open circuit dives and some minor bug fixes.

The air temperature is not read.

_________________
http://www.mac-dive.com : support@mac-dive.com : @MacDiveApp


Top
 Profile  
 
PostPosted: Sat Aug 13, 2016 12:19 pm 
Offline

Joined: Wed Feb 12, 2014 5:40 am
Posts: 50
Location: Oslo, Norway
Dive Computer: Suunto Eon Steel
This is a great update! Thanks a lot for the critters-module in the desktop-edition. :-)


Top
 Profile  
 
PostPosted: Sun Aug 14, 2016 10:36 am 
Offline
User avatar

Joined: Mon Oct 31, 2011 4:36 pm
Posts: 11
Location: Wollongong, NSW, Australia
Dive Computer: Helo2 & D9TX
Hi Nick - loving your work and this has been a bit of an epic update :)

I noticed today a small, but reproducible annoyance:
  1. Go to "Gear" section
  2. Add a new piece of kit (yay!) - this will work
  3. Click the "+" to add a second piece of gear: application crashes

I also triggered #3 after editing a dive then going into Gear -> "+" Add -> Crash as soon as I clicked the "+"

Anyone else seeing this?


Top
 Profile  
 
PostPosted: Sun Aug 14, 2016 11:19 am 
Offline
Site Admin
User avatar

Joined: Sat Apr 12, 2008 8:33 am
Posts: 3496
Dive Computer: Shearwater Perdix AI
I am unable to replicate this. Please email the crash report to support.

_________________
http://www.mac-dive.com : support@mac-dive.com : @MacDiveApp


Top
 Profile  
 
PostPosted: Mon Aug 15, 2016 7:40 pm 
Offline

Joined: Sat Apr 18, 2015 5:57 pm
Posts: 7
Dive Computer: OCi / Cobra 3
Great update! The graphs look much nicer and I'm really excited about the critter feature finally being available on my computer.

I was thinking about the critter feature, however, and thought of something that could be really cool, but I'm not sure how easily it could be accomplished: personally I use Adobe Lightroom to manage all of my photos and part of my workflow is to add keywords to my photos so that I can find them in the future. I'm not sure what you're familiarity with LR is, but the keywords function the same as a tag or keyword in many other things like blogs, etc, allowing me to filter my photos, etc. Would it be possible to get MacDive to recognize the keywords embedded in the metadata and automatically "identify critters"? Obviously the names would have to match, but that could save a lot of clicking by preventing me from doing this twice.


Top
 Profile  
 
PostPosted: Wed Aug 17, 2016 5:03 am 
Offline
Site Admin
User avatar

Joined: Sat Apr 12, 2008 8:33 am
Posts: 3496
Dive Computer: Shearwater Perdix AI
I really like the idea, and yes I am familiar with LR. I prefer Aperture, though I am attempting to move to LR since it has been canned. I actually already tag my own critters in the photos.

If I could ask a favour (as I mentioned in the original post), please start a new thread if you have a request or issue. I don't mean to single you out - this is a great idea - it's just easier to track. Please also add a few more details, such as specific examples of what you tag, which fields you use, etc. Even better, send me an email with some example photos that are tagged.

_________________
http://www.mac-dive.com : support@mac-dive.com : @MacDiveApp


Top
 Profile  
 
PostPosted: Wed Aug 17, 2016 9:44 pm 
Offline

Joined: Tue Jul 19, 2011 4:47 pm
Posts: 155
Dive Computer: Perdix
mar10029 wrote:
Really nice profile graph redesign. Not sure if this is included and I just don't know how to do it, or if it's an upcoming project, but is there any way of automatically including decompression profiles into that graph? I see that there is now an NDT graph available, but once it reaches zero, there is no more information. Specifically, can it show the ceiling?

What I do now is download my dives using Shearwater Desktop, and then take a screen shot of that graph and include it in the photo field for decompression dives (see attached).

Thanks, as always for an awesome product!

Mike

Great idea Mike. I also wish I could have the deco in the profile. And in the mean time I'll apply your work around.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ]  Go to page 1, 2  Next

All times are UTC + 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group