Page 3 of 4

Re: Required Test Data

Posted: Wed May 16, 2012 2:29 am
by bundeskater
I have a fresh and not used mares matrix. Do you need test data?

Re: Required Test Data

Posted: Wed May 16, 2012 2:51 am
by TnT
Yes! The Mares Matrix has never been tested before, so that would be interesting to have. I don't know which backend you'll need for this model, but I guess it's going to be puck. If that doesn't work, try the other mares backends (nemo, darwin, iconhd). Note that I'm on holiday for the next two weeks, so you may not get any response during that time.

Re: Required Test Data

Posted: Tue Jul 31, 2012 9:12 am
by redant
TnT wrote:Yes! The Mares Matrix has never been tested before, so that would be interesting to have. I don't know which backend you'll need for this model, but I guess it's going to be puck. If that doesn't work, try the other mares backends (nemo, darwin, iconhd). Note that I'm on holiday for the next two weeks, so you may not get any response during that time.
First post here as I just purchased MacDive as well as a Mares Matrix (recommended by the person at the diving store).

So I've tried all backends and I get more or less the same errors:
Icon HD, Icon HD Net Ready, Nemo Air, Nemo Wide, Puck, Puck Air : Failed connecting to dive computer on serial port '/dev/tty.SLAB_USBtoUART' (error Code: -5)
Nemo, Nemo Apneist, Nemo Excel, : I have the 'Downloading Data' message but it stays stuck at 0.00% (I then have to unplug the computer). In case you ask, I've waited 45 minutes on one of the tries.

Any suggestions?

PS: let me know if I should start another thread.

Re: Required Test Data

Posted: Tue Jul 31, 2012 9:24 am
by nick
The device is not supported yet. We are working on it.

Send me and Jef an email.

Re: Required Test Data

Posted: Sun Mar 17, 2013 12:48 am
by honigferd
Hi, finally getting around to record some data (pool only until April though) with the Aeris F10 v2 - would you need any of that?

Re: Required Test Data

Posted: Sun Mar 17, 2013 2:48 am
by redant
The Mares Matrix is now working thanks to Jef! Just got my dives loaded to MacDiv and it looks great!!

Re: Required Test Data

Posted: Sun Mar 17, 2013 11:56 am
by nick
honigferd wrote:Hi, finally getting around to record some data (pool only until April though) with the Aeris F10 v2 - would you need any of that?
The F10 was added quite some time ago, so no data is necessary unless you are encountering an issue. Cheers!

Re: Required Test Data

Posted: Sun Mar 17, 2013 4:50 pm
by honigferd
Alright. Just making sure because the F10 is still on the list. :)

Re: Required Test Data

Posted: Mon Mar 18, 2013 3:35 am
by nick
Thanks - I should probably update this. We sorted that some time ago :)

Re: Required Test Data

Posted: Sat Feb 21, 2015 1:06 pm
by area51tazz
Dunno if this thread is still active (doesn't look like it :P) but I have dual-transmitter data from an Oceanic Atom 2.0 and an Oceanic OC1.