Cannot read memory with nemo wide

Problems ? Get help here!
Post Reply
mariopsr
Posts: 3
Joined: Tue Mar 23, 2010 5:53 am
Dive Computer: Nemo Wide

Cannot read memory with nemo wide

Post by mariopsr »

I am using MacDive 1.5.3 with Mac OSX 10.6.2. I installed previously CP210X as suggested. Everything was working perfectly. However, suddenly I got "Cannot read memory " message. I have reinstalled CP210X driver. I also check the serial port says "/dev/tty.SLAB_USBtoUART". I would appreciate any clue to make it working again.
Thanks!!!
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Cannot read memory with nemo wide

Post by nick »

Can you follow the instructions in this thread:

http://forum.mac-dive.com/viewtopic.php?f=3&t=14

But use "puck" instead of "vyper2" ?
mariopsr
Posts: 3
Joined: Tue Mar 23, 2010 5:53 am
Dive Computer: Nemo Wide

Re: Cannot read memory with nemo wide

Post by mariopsr »

Thanks a lot,
I have downloaded the puck program. I will follow the instructions as soon as I get home and I will send you the files.
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Cannot read memory with nemo wide

Post by nick »

Cool - thanks! Let me know if you have any problems.
mariopsr
Posts: 3
Joined: Tue Mar 23, 2010 5:53 am
Dive Computer: Nemo Wide

Re: Cannot read memory with nemo wide

Post by mariopsr »

I send you a file by email. I guess I was not lucky. I didn't get the two expected files
thanks for your help
mariopsr
Post Reply