I am using MacDive 1.5.3 with Mac OSX 10.6.2. I installed previously CP210X as suggested. Everything was working perfectly. However, suddenly I got "Cannot read memory " message. I have reinstalled CP210X driver. I also check the serial port says "/dev/tty.SLAB_USBtoUART". I would appreciate any clue to make it working again.
Thanks!!!
Cannot read memory with nemo wide
- nick
- Site Admin
- Posts: 4360
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Cannot read memory with nemo wide
Can you follow the instructions in this thread:
http://forum.mac-dive.com/viewtopic.php?f=3&t=14
But use "puck" instead of "vyper2" ?
http://forum.mac-dive.com/viewtopic.php?f=3&t=14
But use "puck" instead of "vyper2" ?
Re: Cannot read memory with nemo wide
Thanks a lot,
I have downloaded the puck program. I will follow the instructions as soon as I get home and I will send you the files.
I have downloaded the puck program. I will follow the instructions as soon as I get home and I will send you the files.
- nick
- Site Admin
- Posts: 4360
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Cannot read memory with nemo wide
Cool - thanks! Let me know if you have any problems.
Re: Cannot read memory with nemo wide
I send you a file by email. I guess I was not lucky. I didn't get the two expected files
thanks for your help
mariopsr
thanks for your help
mariopsr