Page 1 of 1

SAC not Populating with Shearwater Perdix AI

Posted: Wed Jul 11, 2018 9:44 pm
by diving_life
Can't figure out why the SAC doesn't appear to work when I import dives from my Shearwater Perdix AI. I see the sample data in the RAW tab area, but nothing appears under the Gases tab. Under the Manage tanks/gases, I use a setup with an Aluminum 80 as the default tank with 80CF. I haven't defined a working pressure on the tank. Then under the Gas Mixes I have EAN34 set with 34% oxygen, but no PPO min/max set. Do those missing values on the tank and gas have anything to do with why SAC doesn't show up in the downloaded log?

Re: SAC not Populating with Shearwater Perdix AI

Posted: Thu Jul 12, 2018 4:27 am
by nick
diving_life wrote: I haven't defined a working pressure on the tank.
There you go. This is required in imperial.

Re: SAC not Populating with Shearwater Perdix AI

Posted: Thu Jul 12, 2018 5:26 am
by diving_life
Ok, that makes sense. So I'm thinking a standard aluminum tank I should put at 3,000psi and then a high pressure aluminum tank at 3500. Or would you recommend just having on aluminum 80 tank at max pressure of 3500psi ?

Re: SAC not Populating with Shearwater Perdix AI

Posted: Thu Jul 12, 2018 5:39 am
by nick
I recommend the metric system..

In seriousness, I have no actual recommendation on your working pressure, sorry - I've no idea what kind of tanks you were using, and I don't use imperial ever. MacDive defaults to 3000 when it creates a tank, simply because it's common, but presumably you want to set the actual working pressure of your tanks.