MacDive with Mares Matrix

Problems ? Get help here!
Post Reply
tolyashukh
Posts: 5
Joined: Mon May 14, 2018 2:46 pm
Dive Computer: Mares Matrix

MacDive with Mares Matrix

Post by tolyashukh »

Hello Nick.
I have 2 questions about synchronization data with my Mares Matrix.
1. Why is my NDL (NDT) not synchronized and is not displayed on the graph?
I see only the Temperature and PPO2.
2. The Summary does not display: Personnel Mode: - and Altitude Mode: -.
All this data I can see after the synchronization of Matrix with DIVER'S DIARY. But I really like your software and I wanted to see this information in McDive
I'm using the MAC and IOS version of MacDive.
Thanks for your reply.
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: MacDive with Mares Matrix

Post by nick »

I'm not sure that it's recorded in the downloaded profile, my understanding is that Divers Diary calculates it itself.

Personal Mode and Altitude mode were both specific to the early Suunto D series, and aren't actually available for the majority of devices. They should probably just quietly go away..
tolyashukh
Posts: 5
Joined: Mon May 14, 2018 2:46 pm
Dive Computer: Mares Matrix

Re: MacDive with Mares Matrix

Post by tolyashukh »

Is there a possibility that in the new versions of McDive will be added the ability to calculate NDL?
I can send logs from the Mares Matrix if you need to?
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: MacDive with Mares Matrix

Post by nick »

That's the plan, no ETA. Logs are not necessary, I would prefer to do a generic version that is applied to anything, not try and reverse-engineer Mares' algorithm.
tolyashukh
Posts: 5
Joined: Mon May 14, 2018 2:46 pm
Dive Computer: Mares Matrix

Re: MacDive with Mares Matrix

Post by tolyashukh »

Thanks for your reply.
Post Reply