Hello
First item
Why when I ask for a printed graphic software Macdive, all the software freezes on the print page.
With any application, everything works. my printer is a Brother MFC-7820N multifunction.
Second question
The first time I open the software Macdive I can transfer my data from the computer Suunto Viper air, but the second time he did not see the dive computer on the same session, why.
Thank you
Printer fail
- nick
- Site Admin
- Posts: 4362
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Printer fail
There is a bug with the printing at the moment - if you're on the main dives list when you print it should work ok, but any other area will crash. It's on my to-do list.
For the vyper air - does it remain in data transfer mode? Are you removing the cable and plugging it back in, and then getting the error ? Any console messages? What error messages did you get?
For the vyper air - does it remain in data transfer mode? Are you removing the cable and plugging it back in, and then getting the error ? Any console messages? What error messages did you get?
-
- Posts: 4
- Joined: Tue Mar 02, 2010 2:34 am
- Dive Computer: G5
Re: Printer fail
Thank you for answers
There is a bug with the printing at the moment - if you're on the main dives list when you print it should work ok,
Ansewer : yes its working
For the vyper air - does it remain in data transfer mode?
Ansewer : no
Are you removing the cable and plugging it back in, and then getting the error ?
Ansewr : no
Any console messages?
Ansewer : no
What error messages did you get?
Ansewer : No message of error
No, but when I unplug and replug the connection directly on the diving computer, it goes into transfer mode data. and I can start to upload Macdive.
thanks
There is a bug with the printing at the moment - if you're on the main dives list when you print it should work ok,
Ansewer : yes its working
For the vyper air - does it remain in data transfer mode?
Ansewer : no
Are you removing the cable and plugging it back in, and then getting the error ?
Ansewr : no
Any console messages?
Ansewer : no
What error messages did you get?
Ansewer : No message of error
No, but when I unplug and replug the connection directly on the diving computer, it goes into transfer mode data. and I can start to upload Macdive.
thanks
- nick
- Site Admin
- Posts: 4362
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Printer fail
So it works ok again if you just plug it back in ?
-
- Posts: 4
- Joined: Tue Mar 02, 2010 2:34 am
- Dive Computer: G5
Re: Printer fail
Yes
Likely that the dive computer, reactivates as if it was the first time.
In which country you are located and in what area.
Tanks you
Likely that the dive computer, reactivates as if it was the first time.
In which country you are located and in what area.
Tanks you
- nick
- Site Admin
- Posts: 4362
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Printer fail
Ok, that's something at least!
I'm currently living in Singapore. It's a small place
I'm currently living in Singapore. It's a small place
-
- Posts: 4
- Joined: Tue Mar 02, 2010 2:34 am
- Dive Computer: G5
Re: Printer fail
From your experience in diving, there are some nice area that you recommended.
Tanks
Tanks
- nick
- Site Admin
- Posts: 4362
- Joined: Sat Apr 12, 2008 8:33 am
- Dive Computer: Shearwater Teric
- Contact:
Re: Printer fail
Yeah there's plenty of quality places around SE Asia. Depends where you're going/how much you want to spend really. Are you thinking of coming over this way for a holiday (depending on where you live) ?