Printer fail

Problems ? Get help here!
Post Reply
Marc Gagnon
Posts: 4
Joined: Tue Mar 02, 2010 2:34 am
Dive Computer: G5

Printer fail

Post by Marc Gagnon »

Hello

First item

Why when I ask for a printed graphic software Macdive, all the software freezes on the print page.

With any application, everything works. my printer is a Brother MFC-7820N multifunction. :?

Second question

The first time I open the software Macdive I can transfer my data from the computer Suunto Viper air, but the second time he did not see the dive computer on the same session, why. :(

Thank you
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Printer fail

Post by nick »

There is a bug with the printing at the moment - if you're on the main dives list when you print it should work ok, but any other area will crash. It's on my to-do list.

For the vyper air - does it remain in data transfer mode? Are you removing the cable and plugging it back in, and then getting the error ? Any console messages? What error messages did you get?
Marc Gagnon
Posts: 4
Joined: Tue Mar 02, 2010 2:34 am
Dive Computer: G5

Re: Printer fail

Post by Marc Gagnon »

Thank you for answers

There is a bug with the printing at the moment - if you're on the main dives list when you print it should work ok,
Ansewer : yes its working

For the vyper air - does it remain in data transfer mode?
Ansewer : no

Are you removing the cable and plugging it back in, and then getting the error ?
Ansewr : no

Any console messages?
Ansewer : no

What error messages did you get?
Ansewer : No message of error

No, but when I unplug and replug the connection directly on the diving computer, it goes into transfer mode data. and I can start to upload Macdive. :)

thanks
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Printer fail

Post by nick »

So it works ok again if you just plug it back in ?
Marc Gagnon
Posts: 4
Joined: Tue Mar 02, 2010 2:34 am
Dive Computer: G5

Re: Printer fail

Post by Marc Gagnon »

Yes ;)

Likely that the dive computer, reactivates as if it was the first time. :!:

In which country you are located and in what area. :?:

Tanks you
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Printer fail

Post by nick »

Ok, that's something at least!

I'm currently living in Singapore. It's a small place :)
Marc Gagnon
Posts: 4
Joined: Tue Mar 02, 2010 2:34 am
Dive Computer: G5

Re: Printer fail

Post by Marc Gagnon »

From your experience in diving, there are some nice area that you recommended. :?:


Tanks
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Printer fail

Post by nick »

Yeah there's plenty of quality places around SE Asia. Depends where you're going/how much you want to spend really. Are you thinking of coming over this way for a holiday (depending on where you live) ?
Post Reply