Cressi Leonardo (Error Code: -7)

Problems ? Get help here!
taylorharris50
Posts: 16
Joined: Tue Jun 10, 2014 11:08 pm

Cressi Leonardo (Error Code: -7)

Post by taylorharris50 »

I just bought 2 new Cressi Leonardo computers. Both were used on a dive this week in NC to test them out. They seem to have performed properly and have data present from the dives.

When I got home and tried to import the data into MacDive I am getting the following error message when working with both computers:

Import Error Failed to read dive computer memory (Error Code: -7)

I installed the Cressi driver from the website prior to the import. Have tried 2 USB ports, removed and reinserted the cable into the computer dock, restarted my iMac (10.9.4) and also restarted MacDive (2.3.3).

I have not installed the software that shipped with the computers on a CD.

Any ideas?

Thanks!
Taylor
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Cressi Leonardo (Error Code: -7)

Post by nick »

Are they in PC transfer mode?
taylorharris50
Posts: 16
Joined: Tue Jun 10, 2014 11:08 pm

Re: Cressi Leonardo (Error Code: -7)

Post by taylorharris50 »

nick wrote:Are they in PC transfer mode?
Yes. One of the two computers froze after receiving the error and is stuck in PCLINK mode - will not turn off. The other just got the error message.
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Cressi Leonardo (Error Code: -7)

Post by nick »

Are you using a USB hub, or plugged directly in to the computer?
taylorharris50
Posts: 16
Joined: Tue Jun 10, 2014 11:08 pm

Re: Cressi Leonardo (Error Code: -7)

Post by taylorharris50 »

nick wrote:Are you using a USB hub, or plugged directly in to the computer?
Directly into the iMac.

I took the battery out of the frozen unit which reset it.

After installing the Cressi software the units both now communicate with Mac Dive. Looks like this is resolved.

Thanks,
Taylor
JamworkS
Posts: 65
Joined: Mon Sep 23, 2013 1:58 am
Dive Computer: Cressi Leonardo

Re: Cressi Leonardo (Error Code: -7)

Post by JamworkS »

nick wrote:Are you using a USB hub, or plugged directly in to the computer?
I have the same problem here. I connect it directly to my Mac.

The way I've solved it is by first opening Cressi Interface, forcing it to recognize the Dive Computer and after that, opening MacDive and and start downloading with no hassle.

As you can see, it's not big deal for me, but if you could solve it I'll appreciate it.
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Cressi Leonardo (Error Code: -7)

Post by nick »

Please email support and we will look in to it.

Thanks
JamworkS
Posts: 65
Joined: Mon Sep 23, 2013 1:58 am
Dive Computer: Cressi Leonardo

Re: Cressi Leonardo (Error Code: -7)

Post by JamworkS »

Email sent! Cheers ;).
User avatar
nick
Site Admin
Posts: 4360
Joined: Sat Apr 12, 2008 8:33 am
Dive Computer: Shearwater Teric
Contact:

Re: Cressi Leonardo (Error Code: -7)

Post by nick »

Ta. Will discuss with you there and see if we can figure out what is happening.
taylorharris50
Posts: 16
Joined: Tue Jun 10, 2014 11:08 pm

Re: Cressi Leonardo (Error Code: -7)

Post by taylorharris50 »

nick wrote:Ta. Will discuss with you there and see if we can figure out what is happening.
Still problematic on my end. It eventually will work but takes a lot of tries to connect.

Recently upgraded to 10.10 Yosemite.
Post Reply